Epiphan Lecture Recorder x2 Especificações descarregar pdf (Página 121)

Lecture Recorder x2 User Guide 5-1 Create Recordings

To control recordings with the red button:

1. Power on the device.

2. Attach sources and configure the device.

3. Connect the red button to a USB port on the device.

4. Press the button once to start recording; recording starts and the button lights red, after a few

moments it flashes to confirm recording.

5. Press the button again to stop recording; recording stops and the red button light turns off.

Control recording with on-device buttons

The Lecture Recorder x2 has a button on the side of the unit that toggles recording. By default, a single press

of this button toggles recording on or off.

To toggle recording on/off with the right on-device button (assuming the button has its default

configuration):

1. Power on the device.

2. Attach sources and configure the device.

3. Press the recording button once to start recording; recording starts. If desired, check the web interface

to see that recording is started.

4. Press the recording button again to stop recording. If desired, check the web interface to see that

recording is stopped. See View the List of Stored Files

The Lecture Recorder x2 gives you the opportunity to change this button behaviour. You can disable the

button or make use of both buttons if you wish.

112

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 207 208

Sem comentários

Epiphan Lecture Recorder x2 Especificações Página 121